문제 및 해결책

일반적인 플라스틱 재료 문제에 대한 실질적인 답변

기사 둘러보기 →

MP severe internal stress concentration

Injection Molding MP internal stress orientation stress annealing uniform cooling

MP '2079851475616104452 cold slug marks

Injection Molding MP injection cold slug mark nozzle temperature cold slug well injection pressure

MP '2079851475616104452 flow marks

Injection Molding MP injection flow mark injection speed mold temperature gate area

MP '2079851475616104452 sink marks

Injection Molding MP injection sink mark holding pressure wall thickness difference gate design

MP '2079851475616104452 multi-cavity filling imbalance

Injection Molding MP injection multi-cavity balance runner design gate size mold flow analysis

MP injection molded product ejector whitening

Injection Molding MP injection ejector whitening ejector pin area cooling time draft angle

MP mixed with color masterbatch uneven color

color masterbatch carrier matching and full dispersion are key to color uniformity

Injection Molding MP coloring color masterbatch carrier compatibility pigment dispersion color streaks

MP injection molded products have oil spots

Injection Molding MP injection oil spots mold release agent lubricant exudation mold sealing

MP '2079851475616104452 insufficient flow length ratio

Injection Molding MP injection flow length ratio melt viscosity injection temperature flow aid

MP '2079851475616104452 low weld line strength

Injection Molding MP injection weld line insufficient entanglement injection temperature overflow well

이전 1 ... 65 66 67 68 69 70 71 ... 151 다음