Sorun ve Çözüm

Q

Defects caused by insufficient drying before cross-linked polyethylene cross-linked polyethylene processing (Variant: strengthened measures)

A

Insufficient drying is a common root cause of processing defects, and a complete drying system and moisture content detection system needs to be established. Targeted preventive measures need to be taken in different production scenarios.

Material Drying raw '2079851475616104451moisture contentsilver streakbubbledehumidifying drying

2 görüntüleme

Tam Yanıtı Oku →

Q

Bubbles/pores on the surface of cross-linked polyethylene extruded products (Variant: strengthened measures)

A

Bubbles are caused by water vaporization or gas entrainment, and need to be solved from raw '2079851475616104451 and the venting system. Targeted preventive measures need to be taken in different production scenarios.

Material Drying bubbleporeraw '2079851475616104451ventingvolatiles

2 görüntüleme

Tam Yanıtı Oku →

Q

Bubbles/gas pores on the surface of random copolymer polypropylene pipe special material extruded products

A

Bubbles are caused by water vaporization or gas entrainment, and need to be solved from raw '2079851475616104451 and venting system.

Material Drying bubble gas pore raw '2079851475616104451 venting volatiles

2 görüntüleme

Tam Yanıtı Oku →

Q

Defects caused by insufficient drying before processing of random copolymer polypropylene pipe special material random copolymer polypropylene pipe special material

A

Insufficient drying is a common root cause of processing defects, and a sound drying system and moisture content inspection system need to be established.

Material Drying raw '2079851475616104451 moisture content silver streak bubble dehumidifying drying

2 görüntüleme

Tam Yanıtı Oku →

Q

Rough inner and outer walls of random copolymer polypropylene pipe special material pipes (Variant: strengthened measures)

A

Rough pipe wall is caused by low mold temperature or poor surface condition, and needs to be solved from temperature control and mold maintenance. In different production scenarios, targeted preventive measures need to be taken.

Material Drying rough pipe wall die temperature mandrel temperature mold polishing sizing sleeve

2 görüntüleme

Tam Yanıtı Oku →

Q

Bubbles/gas pores on the surface of random copolymer polypropylene pipe special material extruded products (Variant: mass production scenario)

A

Bubbles are caused by water vaporization or gas entrainment, and need to be solved from raw '2079851475616104451 and venting system. In different production scenarios, targeted preventive measures need to be taken.

Material Drying bubble gas pore raw '2079851475616104451 venting volatiles

2 görüntüleme

Tam Yanıtı Oku →

Q

Bubbles/gas pores on the surface of random copolymer polypropylene pipe special material extruded products (Variant: strengthened measures)

A

Bubbles are caused by water vaporization or gas entrainment, and need to be solved from raw '2079851475616104451 and venting system. In different production scenarios, targeted preventive measures need to be taken.

Material Drying bubble gas pore raw '2079851475616104451 venting volatiles

2 görüntüleme

Tam Yanıtı Oku →

Q

Defects caused by insufficient drying before processing of random copolymer polypropylene pipe special material random copolymer polypropylene pipe special material (Variant: strengthened measures)

A

Insufficient drying is a common root cause of processing defects, and a sound drying system and moisture content inspection system need to be established. In different production scenarios, targeted preventive measures need to be taken.

Material Drying raw '2079851475616104451 moisture content silver streak bubble dehumidifying drying

2 görüntüleme

Tam Yanıtı Oku →

Q

Random copolymer polypropylene pipe special material (Nordic standard） pipe inner and outer wall roughness

A

Pipe wall roughness is caused by low mold temperature or poor surface condition, and needs to be solved from temperature control and mold maintenance.

Material Drying pipe wall roughnessdie temperaturemandrel temperaturemold polishingsizing sleeve

2 görüntüleme

Tam Yanıtı Oku →

Q

Random copolymer polypropylene pipe special material (Nordic standard） Random copolymer polypropylene pipe special material (Nordic standard） improper production environment control during processing

A

The production environment is an important factor affecting processing quality, requiring the establishment of a sound environmental control system.

Material Drying environmental controlworkshop temperaturehumiditycooling water temperatureprocess stability

2 görüntüleme

Tam Yanıtı Oku →

Sorun ve Çözüm

Kategoriler

Teklif Al