Sorun ve Çözüm

Yaygın plastik malzeme zorluklarına pratik yanıtlar

Makalelere Göz At →

Rough inner wall of polyolefin plastomer extruded products

A rough inner wall is caused by low mandrel temperature or poor surface condition, and needs to be solved from temperature control and mold maintenance.

Processing Machinery rough inner wallmandrel temperaturemandrel polishingmelt temperatureplasticization quality

3 görüntüleme

Tam Yanıtı Oku →

Degradation and discoloration appearing on polyolefin plastomer extruded products

Degradation and discoloration are caused by overheating or excessive shear, and need to be prevented from three aspects: temperature control, speed, and material selection.

Processing Machinery degradation discolorationthermal degradationscrew speedresidence timeantioxidant

3 görüntüleme

Tam Yanıtı Oku →

Improper selection of processing temperature window for polyolefin plastomer polyolefin plastomer

The selection of the temperature window is the foundation of processing, and it needs to be reasonably set according to the material characteristics and actual operating experience.

Processing Machinery processing temperaturetemperature windowplasticization qualitymaterial degradationtemperature calibration

3 görüntüleme

Tam Yanıtı Oku →

Uneven cutting end face of polyolefin plastomer pipes (Variant: Enhanced Measures)

The uneven cutting end face is caused by tool wear or improper cutting parameters, and the tool needs to be maintained and the cutting process optimized. Targeted preventive measures need to be taken in different production scenarios.

Processing Machinery cutting end facecutting toolcutting speedpipe coolingcutting machine correction

3 görüntüleme

Tam Yanıtı Oku →

Cooling system efficiency decline of polyolefin plastomer extruders (Variant: Enhanced Measures)

The decline in cooling efficiency is caused by insufficient water volume or excessive water temperature, and the cooling system needs to be improved and the water temperature controlled. Targeted preventive measures need to be taken in different production scenarios.

Processing Machinery cooling efficiencycooling water flowcooling water temperaturewater circuit scalingcooling water tank

3 görüntüleme

Tam Yanıtı Oku →

Sizing device failure of polyolefin plastomer extruders (Variant: Enhanced Measures)

Sizing device failure needs to be solved from three aspects: vacuum system, cooling system, and mold precision. Targeted preventive measures need to be taken in different production scenarios.

Processing Machinery sizing devicevacuum degreesizing sleeve wearcooling watermold concentricity

3 görüntüleme

Tam Yanıtı Oku →

Unreasonable die head flow channel design of polyolefin plastomer extruders (Variant: Enhanced Measures)

The die head flow channel design needs to ensure uniform melt distribution and no stagnation, and the die head should be redesigned when necessary. Targeted preventive measures need to be taken in different production scenarios.

Processing Machinery die head flow channeluniform flow velocityland sectionflow channel dead cornertemperature uniformity

3 görüntüleme

Tam Yanıtı Oku →

Mechanical properties of polyolefin plastomer extruded products not up to standard (Variant: Enhanced Measures)

Mechanical properties not up to standard are caused by material degradation or poor processing quality, and need to be solved from temperature control and plasticization quality. Targeted preventive measures need to be taken in different production scenarios.

Processing Machinery mechanical propertiesmaterial degradationplasticization qualitycrystallinityregrind proportion

3 görüntüleme

Tam Yanıtı Oku →

Excessive gel/gel particles in polyolefin plastomer extruded products (Variant: Enhanced Measures)

Gel is caused by insufficient plasticization or raw material quality problems, and needs to be solved from temperature control, screw design, and raw material selection. Targeted preventive measures need to be taken in different production scenarios.

Processing Machinery gelgel particlesplasticization temperaturescrew mixingscreen mesh

3 görüntüleme

Tam Yanıtı Oku →

Polyolefin plastomer pipe pressure resistance test unqualified (Variant: Enhanced Measures)

Unqualified pressure resistance is caused by insufficient wall thickness, material degradation, or internal defects, and needs to be solved systematically from process and material quality. Targeted preventive measures need to be taken in different production scenarios.

Processing Machinery pressure resistance testpipe wall thicknessmaterial degradationcrystallinityplasticization quality

3 görüntüleme

Tam Yanıtı Oku →

Önceki 1 ... 18 19 20 21 22 23 24 ... 203 Sonraki

Kategoriler

Tüm Konular 11636 Material Drying 1439 Injection Molding 1506 Molding Process 740 Molds & Tooling 1506 Processing Machinery 2025 Extrusion & Post 2239 Blow Molding 315 Thermoforming 141 Material Analysis 1343 Production & Quality 382

Sorun ve Çözüm

Kategoriler

Teklif Al