Sorun ve Çözüm

Yaygın plastik malzeme zorluklarına pratik yanıtlar

Makalelere Göz At →

Die Pressure Fluctuation in PE Extrusion

Trace PE die pressure fluctuation in the order of 'material → screw → screen → temperature': pressure is a comprehensive indicator of extrusion system health; if fluctuation persists, don't expect stable products — stabilize the pressure first.

Extrusion & Post PE；extrusion；pressure fluctuation；feeding；screen pack；melt pump

1 görüntüleme

Tam Yanıtı Oku →

Ejection Whitening and Mold Sticking in PE '2079851475616104452

PE ejection whitening and mold sticking = 'large clamping force + concentrated ejection + insufficient cooling': first extend cooling, then distribute ejection, and finally reduce holding pressure; for soft PE, especially guard against 'stretching deformation upon ejection'.

Extrusion & Post PE；ejection whitening；mold sticking；clamping force；ejection；cooling

1 görüntüleme

Tam Yanıtı Oku →

PE Film Wrinkles and Poor Winding

Eighty percent of PE film winding problems come from the film's own thickness unevenness: first get the thickness deviation and centering right, then adjust the tension taper; talking about winding on a film with uneven thickness will never wind well.

Extrusion & Post PE;film;wrinkles;winding;tension taper;centering

1 görüntüleme

Tam Yanıtı Oku →

PE Film Blocking and Poor Opening

Film blocking = three controls of 'additive + tension + temperature': additives manage the surface, tension manages the contact pressure, temperature manages blooming and creep; too much slip agent affects lamination, and the dosage must be carefully balanced according to the final application.

Extrusion & Post PE;film;blocking;anti-blocking agent;slip agent;winding tension

1 görüntüleme

Tam Yanıtı Oku →

PE Film Thickness Deviation

PE film thickness is managed by direction: for MD check the stability of extrusion and haul-off, for TD check the symmetry of the die lip and temperature/air ring; closed-loop thickness measurement is standard, and adjusting the die lip by hand feel has long been unable to keep up with the qualit...

Extrusion & Post PE;film;thickness deviation;MD;TD;die lip;air ring

1 görüntüleme

Tam Yanıtı Oku →

PE Blown Film Bubble Instability

Bubble stability = 'stable extrusion + uniform air ring + still airflow': first suppress the extrusion fluctuations, then even out the air ring, and finally manage the environment; when the LLDPE bubble is unstable, blending to increase the melt strength often works immediately.

Extrusion & Post PE;blown film;bubble instability;air ring;melt strength;blending

1 görüntüleme

Tam Yanıtı Oku →

LLDPE Blown Film Sharkskin and Melt Fracture

LLDPE sharkskin = 'high viscosity meeting high shear'; PPA is the standard solution, and raising the temperature and reducing the speed is the foundation; when pursuing output, the sharkskin critical line speed is the capacity ceiling, which must be systematically solved rather than forcibly rais...

Extrusion & Post LLDPE;blown film;sharkskin;melt fracture;PPA

1 görüntüleme

Tam Yanıtı Oku →

PE Film Gels and Fisheyes

Troubleshoot PE film gels in the three categories of 'unplasticized/cross-linked/contaminated': plasticization and screen pack are the main line, dead corners and regrind are hidden dangers; film is a magnifying glass of melt uniformity, and plasticization must be more than sufficient.

Extrusion & Post PE;film;gel;fisheye;plasticization;screen pack

1 görüntüleme

Tam Yanıtı Oku →

PE Product ESCR Environmental Stress Cracking

ESCR is the most common cause of 'premature death' of durable PE products: material grade, internal stress and media must superimpose to cause failure; blow molded household chemical bottles and industrial drainage pipes are disaster areas, and material selection and verification must be moved up...

Extrusion & Post PE;HDPE;ESCR;stress cracking;media;grade

1 görüntüleme

Tam Yanıtı Oku →

PE Extrusion Screw Slippage and Plasticization Fluctuation

For PE discharge pulsation, first check 'feed zone temperature + feeding': slippage and bridging are the two most common roots; the feed zone is the starting point of extrusion stability—if problems occur here, no matter how accurate the downstream temperature control is, it is useless.

Extrusion & Post PE;extrusion;screw slippage;feed zone;bridging;plasticization

1 görüntüleme

Tam Yanıtı Oku →

Önceki 1 ... 157 158 159 160 161 162 163 ... 224 Sonraki

Kategoriler

Tüm Konular 11636 Material Drying 1439 Injection Molding 1506 Molding Process 740 Molds & Tooling 1506 Processing Machinery 2025 Extrusion & Post 2239 Blow Molding 315 Thermoforming 141 Material Analysis 1343 Production & Quality 382

Sorun ve Çözüm

Kategoriler

Teklif Al