Sorun ve Çözüm

Yaygın plastik malzeme zorluklarına pratik yanıtlar

Makalelere Göz At →

Gel particles / fish eyes

The essence of gel particles (fish eyes) is ultra-high molecular weight components or cross-linked gels in the resin that are not completely melted. The solution approach is "heat up + filter + change material": increase plastication temperature to ensure full melting, use screens to filter gel p...

Extrusion & Post gel particles fish eyeshigh molecular weight componentsplastication temperaturescreen filtrationresin purity

2 görüntüleme

Tam Yanıtı Oku →

Discoloration / burnt / black specks

This problem is a typical manifestation of discoloration / burnt / black specks in extrusion molding. The core of the solution lies in eliminating the root cause of the defect through systematic optimization of process parameters (temperature, speed, pressure) and precision correction of the die/...

Extrusion & Post degradation yellowingprocessing temperatureresidence timeheat stabilizerPVC dehydrochlorination

2 görüntüleme

Tam Yanıtı Oku →

Bamboo pattern / pulsating extrusion

The essence of the bamboo pattern is periodic instability in the matching of extrusion and haul-off speeds. The core of the solution is to eliminate speed fluctuation sources — stabilize the screw rotation speed transmission system, optimize the temperature control PID to eliminate periodic tempe...

Extrusion & Post bamboo patternextrusion-haul-off matchingscrew rotation speed fluctuationtemperature control PIDuniform feeding

2 görüntüleme

Tam Yanıtı Oku →

Melt fracture/sharkskin

The essence of melt fracture is that the die wall shear stress exceeds the critical shear stress of the polymer melt. The solution idea is 'reduce shear + modify interface': lower the extrusion speed or raise the die temperature to reduce the shear rate, and use PPA processing aids to improve the...

Extrusion & Post melt fractureshear stressdie temperatureextrusion speedPPA processing aid

2 görüntüleme

Tam Yanıtı Oku →

Pipe bending/not straight

The essence of pipe bending is that longitudinal cooling asymmetry or axis deviation causes inconsistent shrinkage rates on each side. The core of the solution is to ensure that the cooling system is coaxial with the extrusion axis and that circumferential cooling is uniform, while eliminating tr...

Extrusion & Post pipe bendingcooling uniformitytraction deflectiondie temperaturecoaxiality

2 görüntüleme

Tam Yanıtı Oku →

Uneven release agent coating

This problem is a typical manifestation of uneven release agent coating in transfer molding; the core of the solution lies in the rational design of the runner and gate system, the effective transmission of transfer pressure, and the uniform control of mold temperature. It is recommended to start...

Extrusion & Post draft anglemold polishingholding pressurecooling timerelease agent

2 görüntüleme

Tam Yanıtı Oku →

Excessive Release Agent

This problem is a typical manifestation of excessive release agent in the RIM process; the core of the solution lies in ensuring the precise ratio and full mixing of the two components, while controlling the reaction temperature and curing conditions within the optimal window. It is recommended t...

Extrusion & Post demolding draft anglemold polishingholding pressurecooling timerelease agent

3 görüntüleme

Tam Yanıtı Oku →

Delamination / Peeling

This problem is a typical manifestation of delamination/peeling in '2079851475616104452; the core of the solution lies in eliminating the root cause of the defect through systematic optimization of process parameters (temperature, pressure, speed) and rationality checks of mold design. It is reco...

Extrusion & Post delaminationtemperaturematerial

2 görüntüleme

Tam Yanıtı Oku →

Jetting / Jetting Mark

This problem is a typical manifestation of jetting/jetting marks in '2079851475616104452; the core of the solution lies in eliminating the root cause of the defect through systematic optimization of process parameters (temperature, pressure, speed) and rationality checks of mold design. It is rec...

Extrusion & Post jetting markgate sizeinjection speedcold slug wellsnake-shaped mark

2 görüntüleme

Tam Yanıtı Oku →

Önceki 1 ... 221 222 223 224 Sonraki

Kategoriler

Tüm Konular 11636 Material Drying 1439 Injection Molding 1506 Molding Process 740 Molds & Tooling 1506 Processing Machinery 2025 Extrusion & Post 2239 Blow Molding 315 Thermoforming 141 Material Analysis 1343 Production & Quality 382

Sorun ve Çözüm

Kategoriler

Teklif Al