Injection Molding
3 Aufrufe
HDPE '2079851475616104452 flash
Problembeschreibung
Thin flash on the parting line.
Ursachenanalyse
Low HDPE viscosity easily penetrates the parting line gap; high pressure, insufficient clamping, parting line wear.
Lösung
①Reduce injection/holding pressure; ②increase clamping force; ③repair the parting line; ④appropriately lower the melt temperature.
Wichtigste Erkenntnis
Low viscosity + high shrinkage = the balancing act between flash and sink marks.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!