Injection Molding
5 Aufrufe
Poor Bonding Force in LCP Two-Color and Overmolding
Problembeschreibung
【Problem Phenomenon】Interface peeling occurs after overmolding LCP with soft rubber
Ursachenanalyse
LCP has low surface energy and is chemically inert; it has no chemical bonding with most soft rubbers and relies only on mechanical interlocking; the overmolding interface is inherently weak; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based solely on experience
Lösung
Design mechanical interlocking structures at the interface; select special soft rubber grades that can bond to LCP and do bonding verification; surface plasma treatment to improve bonding force; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
LCP overmolding relies on mechanical interlocking and special soft rubber; chemical bonding cannot be depended on; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!