Processing Machinery
2 Aufrufe
PA66 warpage deformation
Problembeschreibung
PA66 flat parts warp out of the mold, and assembly gaps exceed standard
Ursachenanalyse
Large crystallization shrinkage and uneven cooling produce shrinkage differences; glass fiber orientation makes anisotropy more obvious, and flat parts are most sensitive; during on-site troubleshooting, verify item by item according to this mechanism, avoiding blindly adjusting the machine based only on experience
Lösung
Balance cooling water circuits; multi-point gating for symmetric flow; raise mold temperature to homogenize shrinkage; use setting fixtures for assistance when necessary; after adjustment, take continuous samples to verify the effect, confirm stability before resuming mass production
Wichtigste Erkenntnis
Warpage treatment centers on cooling balance and flow symmetry; after confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!