Injection Molding
6 Aufrufe
PEI Flash
Problembeschreibung
Flash appears on the parting line of PEI products; high-pressure injection and insufficient clamping force act together, making deflashing difficult.
Ursachenanalyse
PEI injection pressure is relatively high at 80~120MPa; when clamping force is insufficient, the melt squeezes into the parting line; clamping force needs to be calculated at ≥50MPa per projected area; mold wear widens the gap.
Lösung
①Calculate clamping force at ≥50MPa per projected area; machines of ≥500 tons are recommended, calculated by area; ②grind and fit the parting line; ③optimize injection pressure not to exceed the necessary value; ④regularly check mold wear.
Wichtigste Erkenntnis
The clamping force calculation for PEI high-pressure processes cannot be omitted; 50MPa specific pressure is a clear standard; mold maintenance prevents gap widening.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!