Processing Machinery
2 Aufrufe
Shutdown Management of PLA Products
Problembeschreibung
Many problems when restarting after shutdown.
Ursachenanalyse
Holding temperature during shutdown causes PLA to degrade rapidly; degraded material is discharged at restart.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience; this mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting
Lösung
①Clean the barrel before shutdown; ②Lower the holding temperature or empty it; ③Discharge and scrap material at restart; ④Shorten shutdown.; After adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
PLA shutdown management must be strict; the degradation speed is faster than conventional materials.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!