Injection Molding
5 Aufrufe
PMMA Injection Speed Shear Marks
Problembeschreibung
Shear marks and haze spots appear on product surfaces during high-speed filling, disappearing after speed reduction.
Ursachenanalyse
When PMMA high-viscosity melt passes through a narrow cross-section at high speed, shear overheating occurs, and surface molecular chains are damaged forming misty shear marks.; During on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based on experience alone.
Lösung
①Adopt a medium-speed filling profile; ②enlarge gate and runner; ③appropriately raise melt temperature to reduce viscosity; ④avoid sudden speed changes.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability.
Wichtigste Erkenntnis
Shear marks indicate that speed exceeds the material's tolerance; PMMA should be filled smoothly at medium speed, and trading temperature for speed is safer.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!