Thermoforming
3 Aufrufe
PMMA Cooling and Setting
Problembeschreibung
PMMA thermoformed parts spring back and deform after demolding
Ursachenanalyse
Demolding occurs before sufficient cooling and setting, and residual stress causes shape springback; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting
Lösung
Extend in-mold cooling time; control the temperature of the setting mold; use fixtures to assist setting after demolding; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
Wichtigste Erkenntnis
Sufficient cooling and setting of thermoformed parts prevents springback; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!