Processing Machinery
2 Aufrufe
PPS product holding pressure management
Problembeschreibung
Balance between sink marks and flash.
Ursachenanalyse
PPS low viscosity, excessive holding pressure easily causes flash; insufficient causes sink marks.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Lösung
①Precise holding pressure setting; ②according to solidification time; ③staged holding pressure; ④verify balance.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
Wichtigste Erkenntnis
PPS holding pressure window is narrow; precise setting is key.; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!