Processing Machinery
2 Aufrufe
PP Impact Copolymer Processing
Problembeschreibung
[Problem Phenomenon] Mixing processes of impact copolymer PP and homopolymer PP, performance not achieved
Ursachenanalyse
Impact copolymer PP contains an ethylene rubber phase; fluidity is slightly lower, requiring slightly higher temperature; excellent impact but slightly reduced rigidity; adjust the process by grade; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
Lösung
Take the middle-upper limit of temperature for impact copolymer; follow the grade data sheet; do not mix process cards for homopolymer and copolymer; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
PP impact copolymer temperature is slightly higher; the rigidity-toughness trade-off follows the grade; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar future problems
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!