Processing Machinery
2 Aufrufe
PSU Adhesive Bonding Assembly
Problembeschreibung
PSU parts have insufficient bonding strength coexisting with stress cracking; improper adhesive selection; assembly failure.
Ursachenanalyse
PSU surface characteristics affect adhesive wetting; solvent-based adhesives may induce stress cracking; curing shrinkage produces interfacial stress; improper surface treatment.; During on-site troubleshooting, verify item by item according to this mechanism, avoiding blindly adjusting the machine based solely on experience
Lösung
①Select an adhesive system matched with PSU; ②Appropriate surface treatment; ③Control adhesive amount and curing conditions; ④Bonding strength and aging verification.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
PSU bonding requires emphasis on both adhesive selection and process; stress cracking risk runs throughout; verification covers the use environment.; After confirming effectiveness, solidify the parameters and practices into the work instructions to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!