Processing Machinery
2 Aufrufe
PVDF Screw Compression Ratio and Plasticization
Problembeschreibung
【Problem phenomenon】General-purpose screws processing PVDF show uneven plasticization, large melt temperature fluctuations, and powder material is more prone to incomplete melting
Ursachenanalyse
PVDF recommends a gradual compression ratio of 2.5:1-3.5:1 and a medium shear rate; a mismatched compression ratio or excessive shear causes frictional overheating and degradation; direct powder molding relies more on the screw's mixing and plasticizing ability
Lösung
Select a gradual screw with a compression ratio of 2.5-3.5:1 and control medium-low shear; strengthen mixing elements for powder material; monitor melt temperature uniformity, and first check screw suitability when fluctuations are large
Wichtigste Erkenntnis
A screw compression ratio of 2.5-3.5:1 is the PVDF plasticization benchmark; powder material is more demanding on the screw; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!