Molding Process
6 Aufrufe
CEF compression set large
Problembeschreibung
The compression set of the CEF product is >30%, lower than the 15% requirement
Ursachenanalyse
The elastic recovery of CEF is insufficient; the crosslinking degree is low and the plastic deformation is unrecoverable; the density is low, the cell wall is thin and the recovery is poor
Lösung
1) Increase the crosslinking degree to 60-70% to reduce plastic deformation; 2) Select high elastic recovery CEF grades; 3) Add reinforcing fillers
Wichtigste Erkenntnis
Large compression set is caused by insufficient crosslinking; increasing the crosslinking degree is the key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!