Material Analysis
6 Aufrufe
POE flexural modulus low
Problembeschreibung
POE product flexural modulus 20% below design value
Ursachenanalyse
POE soft, modulus low; filler addition insufficient or interface poor, no reinforcing effect; crystallinity low
Lösung
1) Add 10-15wt% rigid filler to increase modulus; 2) Nucleating agent to increase crystallinity; 3) Select high modulus grade
Wichtigste Erkenntnis
Low flexural modulus is caused by soft material and insufficient filler; adding rigid filler is key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!