Processing Machinery
3 Aufrufe
Screw design mismatch of linear low-density polyethylene extruder
Problembeschreibung
Product plasticization is uneven, output is low or energy consumption is high, and the screw does not match raw material characteristics.
Screw design directly affects plasticization quality, output and energy consumption.
Ursachenanalyse
(1) The screw compression ratio does not match the density and melting characteristics of linear low-density polyethylene
(2) The screw length-to-diameter ratio is insufficient, and the plasticizing section is not long enough
(3) The design of the transition section between the screw head and the die head is improper
(4) The screw mixing elements are not suitable for this material
(5) The screw flight depth design is improper
Lösung
(1) Select a screw compression ratio suitable for linear low-density polyethylene, generally 2.5-4.0
(2) The screw length-to-diameter ratio is at least 25:1 to ensure full plasticization
(3) Optimize the transition section between the screw head and the die head to eliminate stagnation zones
(4) Select suitable mixing elements (pins, barriers, etc.) according to material characteristics
(5) Ask professional screw designers to optimize flight parameters according to material characteristics
Wichtigste Erkenntnis
Screw design needs to match material characteristics and product requirements; customize special screws if necessary.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!