Processing Machinery
10 Aufrufe
Random copolymer polypropylene pipe special material (Nordic standard） extruder screw design mismatch（Variant: Mass Production Scenario）
Problembeschreibung
The product is unevenly plasticized, output is low or energy consumption is high, and the screw does not match the raw material characteristics.
Screw design directly affects plasticization quality, output and energy consumption.In particular, during continuous mass production, this problem is more prominent and requires key attention.
Ursachenanalyse
（1）The screw compression ratio does not match the density and melting characteristics of the random copolymer polypropylene pipe special material (Nordic standard）\
（2）The screw L/D ratio is insufficient, the plasticizing section length is not enough\
（3）The design of the transition section between the screw tip and the die head is improper\
（4）The screw mixing elements are not suitable for this material\
（5）The screw flight depth design is improper\
（6）In continuous mass production, process parameter fluctuations or equipment status changes aggravate this problem
Lösung
（1）Select a screw compression ratio suitable for the random copolymer polypropylene pipe special material (Nordic standard）, generally 2.5-4.0\
（2）Screw L/D ratio at least 25:1, ensure full plasticization\
（3）Optimize the transition section between the screw tip and the die head, eliminate stagnant material zones\
（4）Select suitable mixing elements according to material characteristics (pins, barriers, etc.)\
（5）Ask professional screw designers to optimize flight parameters according to material characteristics\
（6）And establish standardized work instructions, paying special attention to parameter stability in continuous mass production
Wichtigste Erkenntnis
Screw design needs to match material characteristics and product requirements; if necessary, customize a dedicated screw.Targeted preventive measures need to be taken in different production scenarios.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!