Recycled material quality fluctuation

Products using recycled material show performance fluctuations, such as uneven color, decreased mechanical properties, and increased defects. When this defect appears in extrusion molded products, it is usually closely related to process links such as die design, screw plastication state, cooling and sizing system, or haul-off stability. Persistence of the defect will lead to out-of-tolerance product dimensions, unqualified appearance, or decreased mechanical properties, increasing scrap rate and rework costs. Timely diagnosis and troubleshooting from both extrusion process parameters and equipment status are basic requirements for ensuring stable continuous production.

1. Material/formulation factors: Complex sources of recycled material with large batch-to-batch differences. 2. Comprehensive factors: Partial degradation during recycling causes molecular weight reduction. 3. Material/formulation factors: Impurities or cross-contamination of foreign plastics in recycled material. 4. Die design factors: The geometry of the die flow channel, the land length, and the outlet dimensions directly affect melt flow stability and product dimensional accuracy. Unreasonable flow channel design (presence of dead corners, excessively large convergence angle) is an important root cause of melt fracture, material buildup, and flow marks, and must be addressed starting from optimization of the die structure. 5. Cooling and sizing factors: The cooling rate and uniformity of extruded products determine crystallinity, internal stress level, and dimensional stability. Uneven cooling causes pipe ovality, profile deformation, and internal stress concentration; the cooling water circuit layout and water temperature control must be optimized.

1. Process parameter optimization and adjustment: Establish a recycled material grading management system and strictly control sources. 2. Mold/tooling improvement and maintenance: Test each batch of recycled material for melt index and mechanical properties. 3. Equipment inspection and system maintenance: Mix recycled material with virgin material at a fixed ratio. 4. Material/formulation optimization: Fully homogenize and dry before use. 6. Preventive management: Establish standardized process parameter cards and quality control limits for each mold/product, and regularly conduct process capability index (CPK) evaluations. For recurring problems, use fishbone diagrams or 5Why analysis to trace the root cause, and solidify countermeasures as PFMEA control points. Establish a regular equipment maintenance system and implement life management for key tooling such as dies/spinnerets/calender rolls/coating heads.

This problem is a typical manifestation of recycled material quality fluctuation in extrusion molding. The core of the solution lies in eliminating the root cause of the defect through systematic optimization of process parameters (temperature, speed, pressure) and precision correction of the die/sizing system. It is recommended to start with parameter adjustment and gradually go deeper into the equipment and tooling levels.