Mold Leakage

The casting liquid seeps out from the mold parting surface or sealing surface. This problem is relatively common in casting molding production and requires comprehensive analysis and solution from multiple aspects of materials, processes, and equipment.

(1) In terms of the mold: insufficient mold clamping force, the mold structure or condition directly affects the flow and molding of the material in the cavity. (2) Process factors: aging or damage of the parting surface sealing gasket, this factor affects the product's '2079851475616104453 and final quality. (3) In terms of the mold: mold deformation causes an excessive clamping gap, the mold structure or condition directly affects the flow and molding of the material in the cavity.

(1) Equipment maintenance: check and tighten the clamping mechanism, formulate a regular inspection and maintenance plan to ensure the equipment is in optimal working condition. (2) Equipment maintenance: replace the sealing gasket, formulate a regular inspection and maintenance plan to ensure the equipment is in optimal working condition. (3) Equipment maintenance: repair or replace the deformed mold, formulate a regular inspection and maintenance plan to ensure the equipment is in optimal working condition. (4) Implementation measures: use sealing strips to compensate for the gap., formulate a specific operation plan based on actual production conditions and verify the implementation effect. (5) Preventive measures: establish a complete process control standard and quality inspection system, and regularly review process data for continuous optimization.

This problem requires comprehensive analysis from multiple dimensions of materials, processes, equipment, and operation, and should be solved by systematically optimizing process parameters and the quality control system.