Thermoforming
7 조회수
Blistering/bulging (local uneven foaming)
문제 현상
Local raised bulges appear on the product surface.
This problem is relatively common in foam molding production and requires comprehensive analysis and solution from multiple aspects of materials, processes, and equipment.
원인 분석
(1) Mixing process aspect: local uneven mixing of raw materials causing violent foaming spots; uneven mixing causes inconsistent reaction or performance in various regions.
(2) Temperature parameter aspect: local mold temperature too high accelerating local foaming, which may trigger thermal degradation of the material or runaway reaction rate, damaging the internal structure of the product.
(3) Process factor: filler or pigment agglomeration affecting cell nucleation; this factor affects the '2079851475616104453 and final quality of the product.
해결 방법
(1) Process operation: improve mixing uniformity, optimize stirring parameters to ensure uniform dispersion of all components, and avoid local concentration differences.
(2) Process control: control mold temperature uniformity; establish an online monitoring mechanism, set parameter upper and lower limits and implement alarm management.
(3) Implementation measures: ensure fillers/pigments are fully dispersed., formulate specific operation plans based on actual production conditions and verify implementation effects.
(4) Preventive measures: establish a sound process control standard and quality inspection system, and regularly review process data for continuous optimization.
핵심 요약
This problem requires comprehensive analysis from multiple dimensions of materials, processes, equipment, and operation, and should be solved by systematically optimizing process parameters and the quality control system.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!