Demolding time too early

The product is not fully cured when taken out, causing post-foaming deformation. This problem is particularly prominent when the production cycle is fast or the mold temperature is abnormal, and causes product damage in severe cases.

(1) Process time aspect: production cycle too fast compressing demolding time; improper time control causes the reaction or cooling process to fail to meet process requirements, affecting the final performance of the product. (2) Temperature parameter aspect: curing reaction slows down due to temperature changes; temperature deviation directly affects the physicochemical state and reaction progress of the material. (3) Material aspect: fluctuations in raw material performance indicators or insufficient pretreatment affect molding quality. (4) Process aspect: control deviations of key process parameters cause the '2079851475616104453 to deviate from optimal conditions. (5) Equipment aspect: equipment precision and maintenance status affect the stable execution of process parameters.

(1) Implementation measures: strictly guarantee the minimum demolding time with the formulation unchanged; formulate specific operation plans based on actual production conditions and verify implementation effects. (2) Implementation measures: online detection of product hardness or temperature to judge curing degree., formulate specific operation plans based on actual production conditions and verify implementation effects. (3) Process optimization: determine the optimal process parameter window through systematic tests and establish standardized operating procedures. (4) Quality control: strengthen process monitoring and product inspection, and establish defect early warning and traceability mechanisms. (5) Preventive measures: formulate a mold maintenance plan and regularly check the release agent coating and mold surface condition.

Demolding problems need to be comprehensively solved from three aspects: mold surface treatment, release agent selection, and curing degree control.