Release agent carbonizes at the sintering temperature

The release agent of the preforming mold carbonizes during high-temperature sintering, leaving black marks. This problem is particularly prominent when the production cycle is fast or the mold temperature is abnormal, and in severe cases causes product damage.

(1) Temperature parameter aspect: The heat-resistant decomposition temperature of the organic release agent is lower than the sintering temperature, causing insufficient reaction kinetics or deterioration of material flowability, affecting the normal progress of the '2079851475616104453. (2) Process factor: Residual release agent carbonizes at high temperature; this factor affects the '2079851475616104453 and final quality of the product. (3) Material aspect: Fluctuations in raw material performance indicators or insufficient pretreatment affect molding quality. (4) Process aspect: Deviations in the control of key process parameters cause the '2079851475616104453 to deviate from optimal conditions. (5) Equipment aspect: Equipment accuracy and maintenance status affect the stable execution of process parameters.

(1) Material selection: Use an inorganic release agent that can completely volatilize or decompose during sintering, establish material selection evaluation standards, and determine the optimal plan through comparative tests. (2) Implementation measure: Remove the release agent residue on the product surface after demolding before sintering., formulate specific operation plans in combination with actual production conditions, and verify the implementation effect. (3) Process optimization: Determine the optimal process parameter window through systematic tests, and establish standardized operation procedures. (4) Quality control: Strengthen process monitoring and product inspection, and establish defect early warning and traceability mechanisms. (5) Preventive measure: Install a temperature online monitoring and alarm system, regularly calibrate temperature sensors, and ensure that temperature parameters are stable and controllable.

Temperature control is a key parameter of the sintering '2079851475616104453; it is necessary to ensure that the temperature is accurate, uniform, and stable in order to guarantee the consistency of product quality.