Silicone Coating (silicone release) Cure Inhibition on PET Substrate

The platinum-catalyzed addition-type silicone coating cures incompletely/does not dry. When this defect occurs in coated products, it is usually closely related to coating head precision, coating fluid rheological properties, substrate surface condition, or curing process conditions. The distribution characteristics of coating defects (transverse/longitudinal/random) provide important clues for diagnosing coating head and curing system problems. If it persists, it will cause the coating's functional performance to fail standards, requiring coordinated investigation from the three aspects of coating fluid formulation, coating equipment, and curing process.

1. Equipment factors: certain additives contained in the raw material of the PET substrate (such as antioxidants, decomposed residual catalysts) escape in trace amounts when heated and poison the platinum catalyst. 2. Curing process factors: Curing temperature and time determine the completion degree of the coating crosslinking reaction—insufficient temperature or insufficient time leads to incomplete curing (tacky, low hardness, poor solvent resistance), excessive temperature or excessive time leads to over-curing (embrittlement, yellowing, cracking); the curing window of the coating fluid system must be precisely matched.

1. Process parameter optimization and adjustment: Pre-heat-treat (pre-anneal) the PET substrate to expel inhibitor residues. 2. Mold/tooling improvement and maintenance: Use formulations with stronger catalytic tolerance. 3. Systematic troubleshooting method: Troubleshooting of coating problems follows the order of "substrate → coating fluid → coating head → curing → environment". First check the substrate surface tension (corona treatment effect) and cleanliness, then verify the coating fluid viscosity, solid content, and degassing status, then check the coating head gap and cleanliness, further verify the curing temperature and time, and finally evaluate the influence of ambient temperature, humidity, and cleanliness. 4. Preventive management: Establish standardized process parameter cards and quality control limits for each mold/product, and regularly conduct process capability index (CPK) evaluations. For recurring problems, use fishbone diagrams or 5Why analysis to trace the root cause, and solidify countermeasures as PFMEA control points. Establish a regular equipment maintenance system and implement life management for key tooling such as dies/spinnerets/calender rolls/coating heads.

This problem is a typical manifestation of silicone coating (silicone release) Cure Inhibition on PET substrate in coating. The core of the solution lies in ensuring the substrate surface condition, optimizing the rheological properties of the coating fluid, and precisely controlling the curing process conditions. It is recommended to start with the substrate and coating fluid and gradually investigate to the coating equipment and curing system.