Fine cracks in the bottle mouth thread of the product

In the injection '2079851475616104457 production process, the product exhibits the quality defect of "Fine cracks in the bottle mouth thread of the product".The specific manifestation is Micro-cracks appear at the bottle mouth thread.This defect is more common when processing materials such as PET, PP, HDPE and PS, and its occurrence is usually related to unreasonable settings of injection pressure, parison temperature, blowing pressure and mold temperature.When the Fine cracks in the bottle mouth thread of the product situation is severe, it will cause a series of chain quality defects in the product's appearance, dimensional accuracy, mechanical properties and other aspects, which not only reduces the product's functionality and safety in use, but also directly increases the scrap rate and production cost.Therefore, this problem requires systematic diagnosis and optimization from multiple dimensions such as material selection, the status of the injection '2079851475616104457 machine, core rod, parison mold, blow mold and transfer mechanism, and injection pressure, parison temperature, blowing pressure and mold temperature.

1. Stress concentration at the sharp corners of the thread cavity.This factor causing the problem reflects that certain process conditions or material properties in injection '2079851475616104457 do not meet the optimal forming requirements.Such problems are often cumulative and concealed, and should be investigated and verified as key focus items during process debugging and finalization to ensure hidden dangers are eliminated at the source. 2. Low parison temperature causing cold material.Temperature is the core factor affecting melt fluidity and viscosity.Excessively high temperature settings will cause decreased melt viscosity, insufficient melt strength and even thermal degradation; excessively low temperature results in poor melt fluidity and insufficient plasticization, making smooth filling or forming impossible.A reasonable temperature window should be optimally determined within the recommended range according to the melting characteristics and thermal stability of the material. In addition, the insufficient overall coordination of parison wall thickness uniformity and transfer temperature control is also a factor that cannot be ignored; there are complex interactions and coupling relationships among the process parameters, and the deviation of any parameter may aggravate the degree of Fine cracks in the bottle mouth thread of the product through chain effects. In terms of equipment maintenance, the regular overhaul and accuracy confirmation of the injection '2079851475616104457 machine, core rod, parison mold, blow mold and transfer mechanism are not in place, causing the actual operating parameters of the equipment to deviate from process requirements, which will also become a potential inducement of the Fine cracks in the bottle mouth thread of the product problem.

1. Increase the fillet radius of the thread cavity.When implementing adjustments, it is recommended to use the single-factor variable method, adjusting only one parameter at a time and fully evaluating the effect, to avoid simultaneous changes of multiple parameters making the cause of the problem untraceable.The adjustment amplitude should be small rather than large; each adjustment is recommended to be controlled within 5%~10% of the original value, and after adjustment run stably for at least 3~5 mold cycles to observe the effect. 2. Raise the parison temperature.When implementing adjustments, it is recommended to use the single-factor variable method, adjusting only one parameter at a time and fully evaluating the effect, to avoid simultaneous changes of multiple parameters making the cause of the problem untraceable.The adjustment amplitude should be small rather than large; each adjustment is recommended to be controlled within 5%~10% of the original value, and after adjustment run stably for at least 3~5 mold cycles to observe the effect. It is recommended to formulate a preventive checklist for the Fine cracks in the bottle mouth thread of the product problem, incorporate parison wall thickness uniformity and transfer temperature control into the daily inspection scope, and conduct online monitoring of key parameters through the SPC statistical process control method to achieve early warning and rapid response to problems. In terms of material management, incoming inspection of raw materials and in-process testing of work-in-progress should be strengthened, and key performance indicators of PET, PP, HDPE and PS should be strictly controlled to ensure the stability of forming quality from the source.

In summary, the causes of the "Fine cracks in the bottle mouth thread of the product" problem can be attributed to the combined action of multiple factors such as Stress concentration at the sharp corners of the thread cavity, Low parison temperature causing cold material.To solve this problem, it is necessary to start from aspects such as Increase the fillet radius of the thread cavity, Raise the parison temperature and take systematic governance measures.In actual production, it is recommended to establish a prevention and rapid response mechanism for this problem, achieving stable production and continuous improvement through parison wall thickness uniformity and transfer temperature control.