Molds & Tooling
10 조회수
ABAK dimensional stability improvement
문제 현상
ABAK replaces pure PA to solve dimensional instability problems, but shrinkage management of the alloy itself still requires attention.
원인 분석
Pure PA has a high water absorption rate, causing dimensional expansion of 1~2% and fluctuation of mechanical properties; ABAK alloy utilizes the low water absorption characteristics of ABS to improve dimensional stability; however, the alloy shrinkage rate of 0.6~1.0% still requires mold compensation; there are still slight changes after water absorption.
해결 방법
①Utilize the low water absorption advantage of the alloy; ②design the mold according to a 0.6~1.0% shrinkage rate; ③leave mold correction allowance for critical dimensions; ④verify dimensions in wet state.; After adjustment, take consecutive samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
ABAK dimensional stability is a significant improvement over pure PA; however, precise management of shrinkage and water absorption is still necessary; wet-state verification covers the service environment.; After confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!