Extrusion & Post
5 조회수
Poor ABS painting/printing adhesion
문제 현상
After ABS products are painted or printed, paint peeling and poor ink adhesion appear, and the cross-cut test fails.
원인 분석
Residual mold release agent, hand sweat and oil on the surface, or lubricant in the formula precipitates to the surface, reducing the surface energy, leading to poor wetting and adhesion of the coating; the coating also easily cracks at areas of high internal stress.
해결 방법
①Try not to use or use less mold release agent in '2079851475616104452; ②clean the surface with solvent/plasma before painting; ③evaluate the lubricant precipitation of the material; ④reduce internal stress; ⑤do cross-cut adhesion verification.
핵심 요약
90% of ABS poor adhesion is 'surface contamination': clean first before talking about paint; mold release agent is the number one suspect, lubricant precipitation is an invisible killer, and internal stress causes the coating to be cracked from the inside.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!