Molds & Tooling
7 조회수
ABS cold slug mark
문제 현상
Foggy, pox-like small spots appear near the gate on the product surface, inconsistent with the gloss of the matrix.
원인 분석
The cold material at the front end of the nozzle or runner is carried into the cavity and does not fuse with the new melt; too small a cold slug well or too low nozzle temperature is the main cause.
해결 방법
①Enlarge/add a cold slug well; ②increase the nozzle temperature; ③shorten the contact time between the nozzle and the mold; ④check whether the nozzle heater band is normal.
핵심 요약
The antidote for cold slug marks is the cold slug well + nozzle temperature.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!