Material Drying
4 조회수
ABS moisture absorption characteristics and drying necessity
문제 현상
[Problem phenomenon] ABS product surface silver streaks and water marks, misjudged as equipment or mold problems with repeated machine adjustment
원인 분석
ABS water absorption rate 0.2-0.8% is a hygroscopic material; residual moisture vaporizes into steam during 230-270°C processing, forming silver streaks on the product surface and weakening intermolecular bonding; this is the most common root cause of ABS defects
해결 방법
Dry at 80°C×3-4h before molding to moisture content ≤0.02%; dehumidifying dryer preferred; dried material goes directly from the dryer to the machine to prevent moisture regain; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Ninety percent of ABS silver streaks originate from moisture; 80°C×3-4h drying is an iron rule; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!