Thermoforming
7 조회수
ABS electroplating grade process
문제 현상
[Problem phenomenon] Electroplating grade ABS surface defects cause coating blistering and poor adhesion
원인 분석
Electroplating grade ABS has zero tolerance for surface and internal stress: silver streaks, flow marks and stress all cause coating failure; the process targets low stress and high surface quality and prohibits recycled material; during on-site troubleshooting, verify item by item according to this mechanism, avoiding blind machine adjustment based solely on experience
해결 방법
Electroplating parts take mold temperature upper limit to reduce stress; stricter drying; prohibit recycled material; surface defects cleared to zero before electroplating; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
ABS electroplating parts prohibit recycled material, surface and stress cleared first; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!