Processing Machinery
4 조회수
ABS FDM adhesion and warpage
문제 현상
[Problem phenomenon] ABS printed parts have corners lifting off the platform, severe for large parts
원인 분석
ABS shrinkage is about 0.4-0.7% but cooling stress is large and prone to warpage; heated bed plus adhesion aids (slurry, tape) and chamber heat preservation are the three major countermeasures; during on-site troubleshooting, verify item by item according to this mechanism, avoiding blind machine adjustment based solely on experience
해결 방법
Level the platform and use adhesion agent; add brim; chamber heat preservation; reduce printing speed for large parts; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
ABS printing warpage is solved by the three moves of leveling, adhesion and chamber; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!