Molds & Tooling
7 조회수
ABS sink mark thick wall and rib
문제 현상
ABS sink mark on thick walls and ribs, core melt time long and surface pulled inward, rib designed at 50-60%.
원인 분석
ABS sink mark wall too thick, core melt time longer than skin; surface pulled inward; rib thickness 50-60% of nominal wall thickness; holding pressure and time; gate position.
해결 방법
①Rib thickness 50-60%; ②increase holding pressure; ③gate near thick wall; ④uniform wall thickness; ⑤structural design.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Rib design and holding pressure are the main countermeasures for ABS sink mark; uniform wall thickness is prevention; gate position affects feeding.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!