Material Drying
4 조회수
ASA winter production defects increase
문제 현상
ASA winter workshop production defect rate rises significantly, silver streaks, insufficient filling and brittleness problems concentrate, while the same process runs normally in summer.
원인 분석
Winter ambient temperature is low, raw material initial temperature is low and moisture condensation is easy; barrel heat dissipation is fast and actual temperature is low; mold heats up slowly and defects concentrate in the first few shots; workshop humidity changes affect drying effect.
해결 방법
①Winter barrel temperature increased by 5~10°C compared with summer for compensation; ②raw material preheating and strengthened drying management; ③mass production after the mold is fully preheated; ④workshop temperature and humidity control with environmental parameter recording.
핵심 요약
ASA winter defects are the result of chain effects of environmental temperature; seasonal process adjustments should be standardized; environmental parameter records help abnormality tracing.; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!