Molds & Tooling
7 조회수
ASA shutdown no-cleaning characteristic
문제 현상
[Problem phenomenon] ASA excessive cleaning waste after shutdown, or wrong emptying instead introduces problems
원인 분석
Fast Heat clearly states ASA shutdown procedure is special: machine and mold can shut down normally, no need to clean the ASA in the barrel or hot runner; this is different from most high-temperature materials
해결 방법
Normal shutdown directly turns off heating; long-time shutdown (several days) still recommends emptying to prevent oxidation; restart after sufficient preheating verifies first article; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
ASA normal shutdown with material is a special case, long shutdown still recommends emptying; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!