Material Drying
4 조회수
ASA Silver Streak Multi-Cause Troubleshooting
문제 현상
【Problem Phenomenon】Silver-white streaks repeatedly appear on the surface of ASA products, still not cured after strengthened drying
원인 분석
The main cause of silver streaks is residual moisture, but excessive melt temperature degradation, shear overheating, and material contamination also produce silver streaks; single strengthened drying only covers the moisture cause; during on-site troubleshooting, verify item by item according to this mechanism, avoid blindly adjusting the machine based only on experience
해결 방법
First verify moisture content ≤0.05%; then check melt temperature and back pressure shear; fixed silver streaks near the gate check shear overheating, overall random silver streaks check moisture; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
ASA silver streaks divide into three paths of water, heat, and shear, position distribution points to the cause; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!