Molds & Tooling
4 조회수
COC Hot Runner Internal Heating Failure
문제 현상
After COC uses an internally heated hot runner, local overheating degradation yellow spots and cold material blockage alternate, gate area defects occur frequently, and the situation improves after switching to external heating.
원인 분석
COC suppliers clearly recommend using only externally heated hot runner systems; the temperature gradient and dead spots of the internal heating structure easily cause local overheating or cold material retention; hot runner temperature control accuracy affects gate stability.
해결 방법
①Switch to an externally heated hot runner system; ②independent temperature control for hot runner zones; ③regularly clean hot runner dead spots; ④set the gate temperature precisely according to the grade and verify by actual measurement.
핵심 요약
COC hot runner selection follows the material supplier's recommendation: external heating first; the uncontrollable temperature zone of internal heating is a breeding ground for degradation and blockage; the gate temperature must be actually measured.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!