Extrusion & Post
4 조회수
HDPE film strain hardening
문제 현상
The film bubble width and internal pressure fluctuate, and wrinkles and weak spots appear on the film.
원인 분석
The melt is stretched too fast in the longitudinal direction and undergoes strain hardening, causing the film bubble diameter and internal pressure to become unstable; an excessive draw ratio is the main inducement.; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①Reduce the draw ratio; ②adjust the formulation to reduce the extensional viscosity; ③stabilize the haul-off speed; ④optimize the cooling gradient.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Strain hardening is an extensional rheology problem; reducing the stretching load and adjusting the material rheological properties are two solution paths.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!