Material Drying
4 조회수
HDPE film misty water marks
문제 현상
Misty water mark traces appear on the film surface, and the transparency decreases locally.
원인 분석
The extrusion temperature is low and plasticization is insufficient, and the interface between unmelted particles and the melt scatters light; moisture content exceeding the standard due to damp resin also produces water marks.; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①Appropriately raise the extrusion temperature to improve plasticization; ②dry the raw material until the moisture content is within 0.3%; ③check the plasticizing capacity of the screw; ④stabilize the feeding.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Misty water marks point to plasticization and moisture problems; attacking both temperature and drying can eliminate them.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!