Processing Machinery
7 조회수
HDPE film insufficient screw mixing
문제 현상
The film has many gel particles and poor dispersion, which improved after switching to a barrier screw with a mixing section.
원인 분석
Ordinary screws are inadequate for the melt uniformity requirements of film-grade; unmelted and semi-melted particles directly enter the film and form gel particles.; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①Select a screw with a barrier section and mixing head; ②ensure a sufficient length-to-diameter ratio; ③optimize the temperature to promote plasticization; ④regularly check the screw condition.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Film has the highest requirements for melt uniformity; screw design is the equipment foundation of gel particle control.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!