Molding Process
4 조회수
HDPE Shrinkage 1.5-4%
문제 현상
Product dimensional deviation is large, sink marks are obvious in thick-wall areas, and shrinkage differences at different wall thicknesses are significant
원인 분석
HDPE high crystallinity makes its shrinkage of 1.5-4% rank at the forefront of general-purpose plastics; crystallization shrinkage superimposed with thermal shrinkage makes thick-wall areas crystallize more fully and shrink more; wall thickness differences cause uneven shrinkage and warpage
해결 방법
①Allow mold shrinkage allowance of 1.5-4% and correct through mold trials; ②uniform wall thickness design within ±10%; ③strengthen holding pressure to compensate shrinkage in thick-wall areas; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
HDPE's high shrinkage is its crystallization nature; mold shrinkage allowance plus wall thickness uniformity plus holding pressure compensation are the three key measures for dimensional control; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!