Processing Machinery
7 조회수
HDPE Warpage Deformation
문제 현상
Product warpage is out of tolerance, flatness is poor, and assembly gaps are uneven
원인 분석
HDPE warpage originates from uneven cooling, wall thickness differences, and molecular orientation; anisotropic shrinkage makes deformation directional; rapid cooling locks in stress and aggravates warpage; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based solely on experience
해결 방법
①Uniform wall thickness ±10%; ②balanced arrangement of cooling water channels; ③control cooling rate at about 3℃/s; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
HDPE warpage is a comprehensive test of shrinkage management; uniform wall thickness plus balanced cooling plus controlled cooling rate; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!