Molds & Tooling
4 조회수
LCP Thin-wall Short Shot
문제 현상
Ultra-thin-wall products (0.1~0.3mm) are incompletely filled.
원인 분석
LCP melt solidifies instantly upon contacting the mold wall, and the flow front freezes as soon as filling speed slows slightly; flow length exceeding 150mm or improper gate design also causes short shot.; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based solely on experience
해결 방법
①Use high-speed filling to exploit LCP's fast-solidifying characteristic; ②control flow length within 150mm; ③multi-point gates close to thick areas; ④appropriately increase melt and mold temperature.
핵심 요약
LCP thin-wall filling is a race between speed and solidification; high-speed filling is the condition for realizing its thin-wall capability.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!