Processing Machinery
4 조회수
LCP Excessive Holding Pressure Internal Stress
문제 현상
Product has large internal stress, warpage, or cracking at weld lines.
원인 분석
LCP shrinkage in the flow direction is near zero, so holding pressure demand is far lower than conventional materials; excessive holding pressure instead presses in too much material and generates stress.; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based solely on experience
해결 방법
①Control holding pressure at 40~60MPa light holding; ②shorten holding time; ③set according to the product weight stabilization point; ④verify the stress level has decreased.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
LCP requires light holding pressure; the near-zero shrinkage characteristic determines that its holding strategy is opposite to conventional plastics.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!