Molds & Tooling
4 조회수
LCP Flash and Overflow
문제 현상
【Problem Phenomenon】Thin-sheet flash appears at the parting line and ejector pins of LCP products, and the mold clamping surfaces are gradually pressed with dents
원인 분석
LCP melt viscosity is extremely low and very easily seeps into 0.02mm-level tiny gaps to form flash; it worsens when clamping force is insufficient, the parting line is worn, or venting is too deep; flash of low-viscosity materials is a commonly recognized problem in Celanese troubleshooting and industry literature
해결 방법
Verify the clamping force and repair the fitting accuracy of the parting line; control the vent groove depth to the allowable lower limit for low-viscosity materials; appropriately reduce injection speed and peak pressure to avoid overfilling
핵심 요약
Low-viscosity LCP is extremely sensitive to mold fitting accuracy; mold repair and clamping take priority over pressure reduction; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!