Molding Process
7 조회수
Wrong Selection Among Three Melting-Point Classes of LCP Grades
문제 현상
【Problem Phenomenon】When processing a new LCP grade with temperature set by general experience, non-melting or degradation occurs
원인 분석
LCP is divided into classes I/II/III, with melting points spanning about 280-400℃, significantly different; the temperature windows of different classes are completely different; the Rianlon review records the correspondence between melting points and processing temperatures of the three LCP classes
해결 방법
When changing grades, first check the data sheet to confirm the class and melting point; class I high-temperature grades require dedicated high-temperature machines; for class III low-temperature grades, be careful not to overheat and degrade; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
LCP temperature is set by class; when changing grades, the melting point must be checked before setting the process; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!