Molds & Tooling
4 조회수
LCP Gate Marks and Appearance Surface Management
문제 현상
【Problem Phenomenon】Gate marks on the appearance surface of LCP products are obvious, and whitening occurs after cutting
원인 분석
LCP gate area orientation is severe and brittleness is large, and the sheared section shows stress whitening; improper gate design of appearance parts leaves marks exposed; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based solely on experience
해결 방법
Use submarine or pin-point gates with automatic cutting on appearance surfaces; place the gate on non-appearance surfaces or use lap feeding; sharp trimming tools reduce stress whitening; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
LCP gate marks' appearance is controlled by submarine gates and sharp trimming; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!