Material Drying
4 조회수
LDPE Drying Judgment
문제 현상
LDPE is nominally non-water-absorbing, yet bubbles are still occasionally seen in products in the rainy season.
원인 분석
LDPE's water absorption is extremely low; bubbles mostly come from surface-attached water, regrind moisture, or entrained air; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience.
해결 방법
New material sealed can skip drying; regrind and rainy-season material dried at 80℃ for 1-2 hours; for bubbles, check air entrainment first; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability.
핵심 요약
LDPE drying is performed as needed; bubbles are not necessarily attributed to moisture; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; Incorporate this case into the defect archive as a troubleshooting reference for similar future problems.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!