Processing Machinery
7 조회수
LDPE Back Pressure Control
문제 현상
LDPE back pressure too high causes gel spots in the film.
원인 분석
High back pressure shear heat causes local overheating to form gels; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; This mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting.
해결 방법
Control back pressure at the low limit; measure actual melt temperature; when gels appear, check back pressure; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; Change only one variable at a time and record parameter changes to facilitate locating effective measures.
핵심 요약
LDPE back pressure should be low to prevent gels; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; Incorporate this case into the defect archive as a troubleshooting reference for similar future problems.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!